20 - 200W Open Frame Power Supply with Customized Size and CE RoHS Compliant

Product Description

200W Power supply
Features:
1. Universal AC input/Full range
2. Protections: Short circuit/Overload/Over voltage/Over temperature
3. Cooling by free air convection
4. Led indicator for power on
5.100% full load burn-in test
6. No load power consumption <0.1W
7. All using 105degree long life electrolytic capacitors
8. Withstand 300VAC surge input for 5 second
9. High operating temperature up to 70 degree
10. Withstand 5G vibration test
11. High efficiency, long life and high reliability
12.2 years warranty

	DC VOLTAGE	12V24V36V48V
	RATED CURRENT	0-17.0A
	CURRENT RANGE	0 ~ 17.0A
	RATED POWER	200.0W
	RIPPLE & NOISE (max.)	120mVp-p
	VOLTAGE ADJ. RANGE	12.0~48.0V
	VOLTAGE TOLERANCE	±1.0%
	LINE REGULATION	±0.5%
	LOAD REGULATION	±0.5%
	SETUP, RISE TIME	1000ms, 30ms/230VAC 1000ms, 30ms/115VAC at full load
	HOLD UP TIME (TYP.)	70ms/230VAC 12ms/115VAC at full load
INPUT	VOLTAGE RANGE	85~264VAC   120~370VDC
	FREQUENCY RANGE	47~63HZ
	EFFICIENCY (Typ.)	87%
	AC CURRENT	0.35A/115VAC     0.25A/230VAC
	INRUSH CURRENT (max.)	COLD START 65A/230VAC
	LEAKAGE CURRENT	Less than 2mA/240VAC
PROTECTION	OVER LOAD	Above 105% rated output power
		Protection type : Hiccup mode, recovers automatically after fault condition is removed
	OVER VOLTAGE	13.8 ~ 16.2V
		Protection type : Shut off o/p voltage, clamping by zener diode
	OVER TEMPERATURE	U1 Tj 140°Ctypically (U1) detect on main control IC
		Protection type : Shut down o/p voltage, recovers automatically after temperature goes down
ENVIRONMENT	WORKING TEMP.	-20~+70°C(Refer to "Derating Curve")
	WORKING HUMIDITY	20~90% RH non-condensing
	STORAGE TEMP., HUMIDITY	-40~+85°C10~95%RH
	TEMP. COEFFICIENT	±0.03%(0~50°C)
	VIBRATION	10 ~ 500Hz, 5G 10min./1cycle, period for 60min. each along X, Y, Z axes
SAFETY&EMC	SAFETY STANDARDS	IEC 60950  approved
	WITHSTAND VOLTAGE	I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC
	ISOLATION RESISTANCE	I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25°C/ 70% RH
QTHERS	MTBF	1608.8Khrs min.     MIL-HDBK-217F (25°C)
	DIMENSION	65.5*58*28mm (L*W*H)
	PACKING	0.28Kg; 58pcs
NOTE	1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°Cof ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. Line regulation is measured from low line to high line at rated load. 5. Load regulation is measured from 0% to 100% rated load. 6. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to "EMI testing of component power supplies."